Takagi OM-8 - Page 29

To Next Page

To Previous Page

Installation

・Fixing the cables

1.Put the cables in the cable holders on the

balanced arm.

Cableholders

OM8-T42

・Connecting the cables

1.Remove the bottom cover by removing the

two screws.

Removetwoscrews

OM8-T43

2.Put the cables through the counter-balanced

arm's boss.

Passthrough

OM8-T44

3.Connect the cables to the cable sockets inside

the lamp arm.　

OM8-T45

Connectto]thesockets