To Next Page

To Previous Page

3-28

OPERATION

•Whenclimbinginreverse,donotchange

directions at the point where the slope

starts.

•Avoidtravelingbysettingonecrawlerona

slopeorprojectingportionandtheother

crawler on a ﬂat surface (with the machine

at a tilt of 10° or more). Travel with both

crawlers set on ﬂat surfaces.

•Donotchangedirectionswhenthecrawler

belts are slack as shown in the ﬁgure.

•Therubbercrawlerbeltswillcomeoffifthe

machine travels backward in this condition.

•Therubbercrawlerbeltswillcomeoffifthe

machine turns in this condition.

HANDLING RUBBER CRAWLERS

Takeuchi TB285 User Manual

Questions and Answers: