Takeuchi TB285 - Hydraulic Breaker; Cautions on Operating

8-6
OPTIONS
HYDRAULIC BREAKER
For handling of the breaker, read the
hydraulic breaker’s manual, provided
separately.
IMPORTANT: When installing an
attachment, make sure that it is
appropriate for the machine being used.
Contact your sales or service dealer for
advice on selecting attachments.
CAUTIONS ON OPERATING
HYDRAULIC BREAKER
•Starttheengineandrunitat75%ofthe
maximum speed.
•Poundwiththechiselpressed
perpendicular to the surface to be
pounded.
•Whenpounding,pressthechiselproperly
againsttheobjecttobebrokensoasto
avoid pounding the air.
•Donotprywiththechiselordonotpry
while pounding.
•Donotmovethechiselwhilepounding.
•Donotpoundcontinuouslyforover30
seconds on the same surface.
•Donotpoundwiththecylinderfully
extended or retracted (at the stroke end).
Leaveamarginofatleast50mm(2in).
•Donotpoundwiththearmplaced
perpendicular to the ground surface.