Takeuchi TB285 - Replacing the Air Breather Filter; Inspecting and Adjusting the Engine Valve Clearance; Retightening the Engine Cylinder Head Bolt <TB285; Inspecting the Engine Compression Pressure <TB290

5-51
MAINTENANCE
REPLACING THE AIR BREATHER FILTER
Warning
Oil may spurt out if caps or filters are
removed or pipes are disconnected
before releasing the pressure in the
hydraulic system.
•Presstheairbreatherbuttontorelieve
the tank pressure.
EVERY 1000 HOURS
1. Open the side cover.
2. Press the button (N) to relieve the internal
pressure from the tank.
3.Loosenthenutandremovethebutton(N)
on the air breather.
4.Removethecover(H).
5. Replace the filter (A).
6.Installthecover(H)onthebody(B).
7. Install the button (N).
INSPECTING AND ADJUSTING THE
ENGINE VALVE CLEARANCE
This operation requires experience. Ask your
sales or service dealer for it.
RETIGHTENING THE ENGINE CYLINDER
HEAD BOLT <TB285>
This operation requires experience. Ask your
sales or service dealer for it.
INSPECTING THE ENGINE
COMPRESSION PRESSURE <TB290>
This operation requires experience. Ask your
sales or service dealer for it.
INSPECTING AND CLEANING THE
ENGINE STARTER AND THE ALTERNATOR
<TB290>
This operation requires experience. Ask your
sales or service dealer for it.