1-25
SAFETY
Prohibit access by unauthorized persons
Do not allow unauthorized personnel in the
work area while working. Be careful when
grinding, welding or using a hammer. You
couldbeinjuredbyyingdebrisfromthe
machine.
PRECAUTIONS ON MAINTENANCE
Prepare work area
•Selectarm,levelworkarea.Makesure
there is adequate light and, if indoors,
ventilation.
•Clearobstaclesanddangerousobjects.
Eliminate slippery areas.
Always keep the machine clean
•Cleanthemachinebeforeperforming
maintenance.
•Stoptheenginebeforewashingthe
machine. Cover the electrical parts so that
water cannot enter. Water on electrical
parts could cause short-circuits or
malfunctions. Do not use water or steam to
wash the battery, electronic control
components, sensors, connectors or the
operator’s compartment.
Stop the engine before performing
maintenance
•Avoid
lubricationormechanical
adjustmentswhilethemachineismoving
or while the engine is running when the
machine is not moving.
•Ifmaintenancemustbeperformedwiththe
engine running, always work as a two
person team communicating each other.
· One person must sit in the operator’s
seat so that he/she can immediately stop
theenginewhennecessary.He/shemust
take care not to touch the lever or pedal
unless necessary.
· The one who performs maintenance
must make sure to keep his/her body or
clothing away from the moving part of the
machine.
To Next Page
Loading...
Need help?
General
