Takeuchi TB285 - Page 98

2-50
CONTROLS
Auxiliary 2/4 select button
This button is used to change from the
second auxiliary operation to the fourth
auxiliary operation.
Pressing this button displays the second
auxiliary
ontheLCDtoindicatethatthe
second auxiliary operation is enabled.
Pressing this button again displays the
auxiliary4thontheLCDtoindicatethatthe
auxiliary 4th operation is enabled.
The actual operation is performed with the
auxiliary 2nd/4th switch (slider switch).
Refer to “Auxiliary 2nd/4th switch” on page
2-26.
ACCESSORIES