1-15
SAFETY
Check the position of the undercarriage
(steering device) before start traveling
PRECAUTIONS WHEN OPERATING
Equipped with outrigger
Travel safely
• Before traveling, set the machine to the
“travel posture”.
Refer to “Preparing for travel” for further
details.
• When traveling on a road, be sure to lock
the working equipment. If any of the
controls is accidentally touched when it is
unlocked, the machine may suddenly move
and cause serious injury or death.
• Keep in mind that the steering wheel
operation is not possible when the engine
is stopped or if the steering pump
becomes faulty.
Before operating the travel pedal, make sure
that the steering device is to the front of the
operator’s seat. Remember that when the
steering device is to the rear of the operator’s
seat, the steering wheel must be operated in
the reverse direction from when it is to the
front.
• When traveling on a public road, be sure to
lock slewing/swinging with the slew/swing
lock pin. For machines with outriggers,
retract the outriggers and install the
stoppers.
To Next Page
Loading...
Need help?
General
