To Next Page
P
Patrick ReidAug 2, 2025
What to do if my Tally DT-230 has a paper jam?
- BBeth GonzalesAug 2, 2025
If your Tally Printer has a paper jam, open the printer cover, inspect the paper path, and carefully remove any stuck paper.
What to do if my Tally DT-230 has a paper jam?
If your Tally Printer has a paper jam, open the printer cover, inspect the paper path, and carefully remove any stuck paper.
How to troubleshoot no LEDs on Tally Printer?
If there are no LEDs lit on your Tally Printer, here's what you should check: 1. Verify the power supply cable connections and the power outlet, ensuring they are correctly connected. 2. Make sure the printer is switched on. If these steps don't resolve the issue, it's possible the PCB is damaged, and you should contact your dealer for assistance.
What does it mean when the error LED blinks and the beeper alarms on my Tally DT-230 Printer?
If the Error LED on your Tally Printer is blinking and the beeper is alarming, it could be due to several reasons: * The thermal print head may be overheated. Turn the printer off and allow it to cool down before resuming. * There might be an overvoltage or low-voltage issue. Ensure you are printing with the specified voltage.
Why are vertical print words missing on my Tally Printer?
If vertical print words are missing when printing with your Tally Printer, it could be due to a dirty thermal head or print roller. Try cleaning the thermal head or print roller. If the problem persists, the thermal head may be damaged, and you should contact your dealer for assistance.
Why is the paper LED always on my Tally DT-230 Printer?
If the Paper LED is always on in your Tally Printer, it means that the roll paper is near the end. The printer can still work normally.
Steps to open the packaging and check the printer for damage.
Instructions for positioning the printer on a stable surface for optimal operation.
Guide on connecting the printer to a power source safely.
Instructions for loading 80mm and 58mm roll paper.
Instructions for installing the printer driver software on your computer.
Explains the meaning of LED indicators and the Feed key.
Procedures for running self-tests and entering hexadecimal dumping mode.
Details DIP switch settings for the serial interface.
Details DIP switch settings for parallel and USB interfaces.
Solves problems indicated by LED lights and beeper alarms.
Step-by-step guide to clear paper jams from the printer.
Instructions for cleaning the print head to maintain print quality.
Comprehensive technical specifications of the printer.
Details available printer interfaces and their pin assignments.
Information on supported paper types, sizes, and loading.
Introduces character sets common across multiple regions.
Displays characters for the USA (PC437) character set.
Displays characters for the PC850 multilingual character set.
Details commands for controlling printer functions and output.
Lists obsolete commands and their recommended upward-compatible alternatives.
General
