To Next Page
M
mileskimberlyJul 29, 2025
What to do if an error occurs during firmware download for Tally T2265plus Printer?
- CChad LeeJul 29, 2025
If an error occurs while downloading the firmware for your Tally Printer, you should repeat the entire procedure.
What to do if an error occurs during firmware download for Tally T2265plus Printer?
If an error occurs while downloading the firmware for your Tally Printer, you should repeat the entire procedure.
General| Printer Type | Dot Matrix Printer |
|---|---|
| Print Width | 136 columns |
| Interface | Parallel, Serial, USB |
| Paper Type | Continuous forms, Cut sheets |
| Print Technology | Impact Dot Matrix |
| Print Resolution | 360 x 360 dpi |
| Noise Level | 55 dB |
| Number of Pins | 24 pins |
| Paper Handling | Push tractor |
Step-by-step instructions for unpacking the printer and checking its contents.
Guidance on selecting a suitable location and positioning the printer correctly.
Procedure to verify and adjust the printer's voltage setting for safe operation.
Instructions for connecting the power cable and data cable to the printer.
Steps for powering on the printer and the initialization process.
Procedure for inserting the ribbon cassette for the first time.
Instructions on how to replace the used ribbon cassette.
Steps for installing printer drivers on Windows 2000/XP systems.
Procedure for installing printer drivers on Windows 7.
Steps for updating the printer's firmware.
Information on rectifying common printer faults.
Describes the printer's normal operating mode where data can be received and printed.
Details how to enter setup mode for selecting menus or using quick-switch functions.
Lists and explains common messages displayed on the printer's LC display.
Instructions on how to change the paper type via application or setup menu.
Information on loading fanfold paper and single sheets into the printer.
Specific instructions for loading fanfold paper.
Instructions for loading single sheets of paper.
Steps to move the paper to the tear-off position for fanfold paper.
How to adjust the print head gap for optimal print appearance.
Procedure to adjust the paper tear position for accurate paper separation.
How to set the position of the first printing line on the paper.
Guide to setting character density (CPI) and selecting fonts.
Explains direct printer programming using the control panel.
Steps to access the printer's main menu system.
Details on setting and using independent menu configurations for different applications.
Procedure for saving changed parameter settings.
Introduction to the various menu settings available for printer configuration.
How to restore factory default settings for the printer.
How to permanently select character styles and their quality.
How to set the number of characters per inch for printing.
How to set the line density (lines per inch) for printing.
How to select printer emulation modes like IBM or Epson.
Choosing settings for the printer's various interfaces.
Selecting the communication protocol for data exchange.
Choosing the active printer interface (parallel, Ethernet, serial, or shared).
Accessing various tests to check printer operation and quality.
Settings for the printer's internal Ethernet interface.
Inputting the printer's IP address.
Inputting the Gateway address for network configuration.
Inputting the Subnet mask address for network configuration.
Setting the left print margin to a fixed value.
Setting the right print margin to a fixed value.
Prevents printing beyond the paper edge by detecting paper width.
Corrective actions for issues where the printer display is dark or the printer does not print.
Troubleshooting steps for when the paper is not fed into the printer.
Procedure for clearing paper jams with fanfold paper.
Procedure for clearing paper jams with single sheets.
Troubleshooting for single sheets not moving to the tear off position.
Addresses issues like print being too pale, smudged, or undefined characters.
Explains error messages like Eject Error, Load Error, and Paper Jam.
Instructions for safely replacing the printer's fuse.
Information about the ribbon's service life and replacement.
Detailed technical specifications for the printer system and print speed.
Details feed speed, first line position, view position, and reverse motion.
Lists specifications for continuous paper, cut sheets, envelopes, and sets of forms.
Information on assigning IP addresses and network settings for Ethernet.
