User guide The Menu
61
Save your selection by pressing the Set key (1). An acoustic signal
verifies this action.
You can exit Parameter mode without saving a setting by pressing
the Exit key (4), the old setting is retained.
After saving your setting (Set), the display in our
example indicates the following text:
This setting is retained even after switching off your printer.
Terminating Setup mode Press either the Setup key to change into Offline mode or the On-
line key to change to Online mode.
German *
Online
Setup
Set < > Exit
21
3
4
Ges.Men Sprache
Online
Setup
Rück Vor
21
3
4
To Next Page
Loading...
