Need help?Do you have a question about the Tally T6090 and is the answer not in the manual?
Details the printer's electronic design and modules.
Details printer specs like emulations, font styles, speeds, and dimensions.
Details power requirements and specifications for the printer.
Outlines recommended procedures for printer maintenance.
Explains the technician-specific mode for advanced printer operations.
Describes various print patterns and tests for printer diagnostics.
Outlines the structure and categories within the printer's TEST Menu.
Covers parameters for testing components, setting thresholds, and calibrating sensors.
Provides a step-by-step guide for correcting printer faults.
Guides for diagnosing and repairing hardware issues not indicated by error messages.
Guides troubleshooting for power-up issues, listing potential causes.
Lists common paper handling issues and their corrective actions.
Lists the tools necessary for performing removal and reinstallation procedures.
Explains how to remove and reinstall the engine controller circuit board assembly.
Guides the removal and reinstallation of the printer's hammer bank assembly.
Provides instructions for adjusting the platen gap for optimal print quality.
Presents the schematic diagram for the T6090 Engine Controller Circuit Board Assembly.
Shows the schematic for the Serial/Parallel Personality Module Circuit Board Assembly.
Displays the schematic for the FourPlex Personality Module Circuit Board Assembly.
Lists part names and their corresponding part numbers for ordering.
Provides a detailed list of components with their part numbers and descriptions.
Explains the step-by-step process for downloading updated printer firmware.
Details the removal and reinstallation of the hammer module.
Provides details specific to the T6091 printer, including specifications and parts.
Describes the T6100/T6101 as an upgrade to the T6090 with parts differences.
To Next Page
General
