Tally T6090 - Heavy (Heavy Forms) Parameter (Menu Level 2); Heavy Forms Selections (Menu Level 3); Pmothr (Paper Motion Threshold) Parameter (Menu Level 2); Poutthr (Paper out Threshold) Parameter (Menu Level 2)

2–11
Chapter 2: Menu Operations
Sht Spd (Shuttle Speed) Parameter (Menu Level 2)
Provides a means to vary the Shuttle Motor speed for a Shuttle Motor Test.
Shuttle Speed selections (Menu Level 3)
23—48 Hz.
Rbn Spd (Ribbon Speed) Parameter (Menu Level 2)
Provides a means to vary the Ribbon Motor speed for a Ribbon Motor Test.
Speed selections (Menu Level 3)
1—250
Default
RibnThr (Ribbon Threshold) Parameter (Menu Level 2)
This parameter allows you to set the Ribbon Sensor Threshold value for the Ribbon Motion
Sensor .
Threshold selections (Menu Level 3)
1—255
POutThr (Paper Out Threshold) Parameter (Menu Level 2)
This parameter allows you to set the Paper Out Threshold value for the Paper Out Sensor to
compensate for reflectivity variances for different types of paper.
Threshold selections (Menu Level 3)
0—255
PMoThr (Paper Motion Threshold) Parameter (Menu Level 2)
This parameter allows you to set the Paper Motion Threshold value for the Paper Motion
Sensor to compensate for reflectivity variances for different types of paper.
Threshold selections (Menu Level 3)
0—255
Heavy (Heavy Forms) Parameter (Menu Level 2)
This Parameter allows you to slow the slew speed and increase the hammer fire for heavy
forms.
Heavy Forms selections (Menu Level 3)
OFF
ON