Tally T6090 - Main Power

T6065 Maintenance Manual Supplement
2
The T6065 is nearly identical to the T6090 in constuction and operation. The only exception is
that the T6065 is slightly lower in print speeds. From a maintenance viewpoint, there are two
areas of difference:
The T6065 Power Supply
The primary factor that distinguishes the T6065 electronics from the T6090 electronics is the
power supply. Although the power supplies are functionally identical, the T6065 power supply
supplies only enough power to satisfy the needs of the limited performance of the T6065.
It is not possible to upgrade a T6065 to a T6090 without upgrading the power supply.
Main Power
The T6065 adjusts automatically to the various worldwide power requirements, 110 ± 20V or 220
± 40V at either 60 ± 3Hz or 50 ± 3Hz. All voltages in the following table are single phase; all
listed currents are at nominal voltage and frequency.
stloVCA
)SMR(
ycneuqerF
)zH(
egarevA
gnitarepO
dnatnerruC
egattaW
kaeP
gnitarepO
dnatnerruC
egattaW
eldIegarevA
dnatnerruC
egattaW
)nim5<(
eldIegarevA
dnatnerruC
egattaW
)nim5>(
01105W531/A0.2W704/A0.5W93/A27.0W92/A65.0
01106W931/A1.2W014/A0.5W93/A57.0W92/A75.0
02205W831/A3.1W414/A2.3W04/A63.0W92/A03.0
Figure 1: Main Power Requirements