Need help?Do you have a question about the Tally T2030 and is the answer not in the manual?
Lists and explains various messages that appear on the LC display, indicating status or errors.
Covers direct printer programming using the control panel, detailing menu access and settings.
A comprehensive table detailing each menu parameter, its options, and descriptions.
Guides on testing and adjusting horizontal print alignment for better registration.
A comprehensive list of control codes and their functions across various printer emulations.
Details the printer's barcode printing capabilities and mode activation.
Presents a table of all supported barcode types, including their codes and descriptions.
Introduces the use of test functions for diagnosing printer issues and checking operations.
Covers mechanical adjustments to compensate for tolerances in paper handling and printing.
Provides guidance on identifying and resolving common printer faults and malfunctions.
Details various tests for print quality, printhead, mechanics, and data transmission efficiency.
Explains how to perform a self-test to verify printer configuration and operational readiness.
Guides on testing data transmission by printing data in hexadecimal and ASCII formats.
Guides on adjusting paper handling and print alignment for optimal positioning.
Troubleshooting steps when the printer's display is dark and no output is produced.
Troubleshooting steps for when the printer is on but not printing.
Troubleshooting steps for issues where the printer fails to feed paper correctly.
Provides instructions for clearing paper jams when using fanfold paper.
Provides instructions for clearing paper jams when using single sheets.
Addresses common print quality issues such as pale print, smudging, and missing dots.
Explains common error messages like 'Load paper', 'Printhead hot', and 'Parity Error'.
Details physical and performance specifications like print speed, width, and densities.
Provides technical details on the parallel and serial interfaces, including rates and protocols.
General| Type | Dot Matrix Printer |
|---|---|
| Print Technology | Impact Dot Matrix |
| Print Width | 80 columns |
| Paper Type | Continuous forms, Cut sheets |
| Noise Level | 55 dB |
| Print Speed | 300 characters per second |
| Interface | USB, Parallel |
| Paper Handling | Tractor feed, Friction feed |
| Printing Method | Bidirectional logic seeking |
| Number of Pins | 24 pins |
To Next Page
