Error messages via the
display
Load paper from ... The paper has run out during operation. The printer has been switched on,
but no paper has been inserted. Insert paper in the active sheet feeder.
Printhead hot The printer prints at lower speed, no action required.
Parity Error Transmission error from computer to printer via the optional serial interface
■ Compare the interface configuration of your printer with the settings of your
computer (protocol).
■ Check the permissible cable lentgh.
Hardware Alarm No internal power. Try switching off and on. Check if changes to options
have been previously carried out. Note down the display message. Contact
your dealer.
Home Position Error on carriage movement. Check if the carriage is blocked.
3
4
Error messages via the display
3 - 21
To Next Page
Loading...
