Tally T2030 - Paper specifications

Paper specifications
Single sheet Paper weight 60 – 120 g/m
2
Width
narrow printer 76 – 220 mm
wide printer 76 – 420 mm
Length 76 – 559 mm
Envelopes without linings
narrow printer DIN C5, C6, DL
wide printer DIN C4, C5, C6, DL
ASF Max. form thickness 0.5 mm
Number of copies 1+5 (9 wire)
1+3 (24 wire)
Paper weight
Original 50 – 60 g/m
2
Copy 45 – 56 g/m
2
Last sheet 50 – 60 g/m
2
Width/Length see single sheet
Continuous paper for
standard and optional tractor
Continuous simple forms Paper weight 60 – 120 g/m
2
Width
narrow printer 76 – 254 mm
wide printer 76 – 420 mm
Continuous sets of forms Paper weight
Original 45 – 65 g/m
2
Copy 45 – 56 g/m
2
Last sheet 45 – 65 g/m
2
Width/Length see continuous simple
forms
Max. form thickness 0.5 mm
Number of copies 1+5 (9 wire)
1+3 (24 wire)
Set of forms Sets of forms may be used only if the top edge
is bound. The binding edge should be as soft as
possible. A wavy binding edge may hamper the
smooth feeding of these sets. Multi-part forms
have to be inserted with the glued top facing
down. Multi-part forms should be tested for
suitability.
Paper specifications
C - 4