TaoTronics TT-AH026 - Product Diagram; Operations and Functions

07 08
1. Nozzle
2. Water Tank
3. Water Reservoir
4. Detachable Water Fender
5. Control Knob
OPERATIONS AND FUNCTIONS
1 2
3 4
Add water
1. Turn the water tank upside down. Remove the tank cap and ll the tank with
clean and cool water only.
2. Attach the tank cap and place the tank back onto the base. Please make
sure it ts together securely so that water can go from the tank to the
reservoir.
5
1 2 3 4
1. If tap water is too hard, it is recommended to use ltered or distilled water
to avoid white dust. DO NOT use hot water.
2. DO NOT add any essential oils or medicinal tablets into the water tank.
3. DO NOT add water into the base or through nozzle.
4. DO NOT move the humidier while the water tank is full of water to avoid
leakage or base overlling.
PRODUCT DIAGRAM
1
6. LED Indicator
7. Atomizer
8. Base
9. Tank Cap
10. Water Inlet
2
3
4
5
6
7
9
10
8