09 10
Operations and Functions
Remote Control
Note: For added convenience, the same control buttons can be
found on the remote control.
4.Front Casters: Put the other caster mounting plate on the front cov-
er against screws. Screw the wing nuts back to the U-bolt and tight-
en properly.
Note: Do not over tighten, which may cause the damage of
radiator flange.
5.Turn the heater right-side up after the casters are installed securely.
Make sure the casters installed can move freely.
6.Place the heater on a firm, level surface free from obstructions, and
at least 3ft. (0.9m) away from any wall or combustible material. Plug
into an appropriate voltage AC outlet. Your heater is ready for use
now.
Temperature / Timer +
Timer Button
LED Display
Temperature / Timer -
ECO Mode
Power ON/OFF/
Heat Level Setting
Power ON/OFF
Temperature / Timer +
Heat Level Setting
Timer Button
Temperature / Timer -
ECO Mode
To Next Page
Loading...
