TapFlo TX220 - Stocking Recommendation

5. SPARE PARTS
IOM manual Tapflo Metal Series 46
5.3. Stocking recommendation
Even at normal operation some details in the pump will be worn. In order to avoid
expensive breakdowns we recommend having a few spare parts in stock.
Depending on the severity of the operation and the importance of assuring continuous
work we offer two different spare part KITS – KIT LIQ includes parts on pump wetted side
and KIT AIR includes parts on the pump air side and that are subject to wear.
TX25 A/C:
Pos.
Description
Q-ty
KIT LIQ
15
Diaphragm
2
18
O-ring set in/outlet
4
23
Valve ball
4
Pos.
Description
Q-ty
KIT AIR
18
O-ring set in/outlet
4
61
Air valve complete
1
25
Muffler
1
TX70 A/C, TX120 A/C, TX220 A/C, TX420 A/C, TX820 A;
T70 S, T120 S, T220 S, T420 S, T820 S:
Pos.
Description
Q-ty
KIT AIR
18
O-ring set in/outlet
4
61
Air valve complete
1
16
Diaphragm shaft
1
36
Centre block seal
2/4*
47
O-ring(back up for 36)
2/4/8**
25
Muffler
1
Pos.
Description
Q-ty
KIT LIQ
15
Diaphragm
2
18
O-ring set in/outlet
4
23
Valve ball
4
* T70 S, T120 S, T220 S, T420 S / TX70 A/C, TX120 A/C, TX220 A/C, TX420 A/C, TX820 A, T820 S
** T70 S, T220 S, T420 S / TX70 A/C, T120 S, TX220 A/C, TX420 A/C, TX820 A, T820 S / TX120 A/C