Need help?Do you have a question about the TapFlo TX70 and is the answer not in the manual?
Explains how the Tapflo diaphragm pump is driven by compressed air and its working mechanism.
Provides instructions and safety precautions for lifting and transporting the pump.
Advises on proper installation and anchoring of suction and discharge piping.
Offers recommendations for satisfactory suction capability and avoiding issues.
Emphasizes installing the pump according to safety rules and not using it for unintended applications.
Stresses the importance of wearing protective clothing and safety goggles during operation.
Details ATEX classification and safety requirements for explosive environments.
Specifies the maximum air pressure and potential hazards of exceeding it.
Recommends an air treatment system for proper operation and pump longevity.
Provides a diagram and list of components for a typical pump installation setup.
Outlines essential checks and preparations before operating the pump.
Details the steps for starting the pump and adjusting its performance.
Advises on operating practices to maximize the pump's lifespan.
Outlines immediate actions to take in case of liquid leakage or other emergencies.
Provides a troubleshooting guide listing common problems, possible faults, and solutions.
Details the step-by-step procedure for disassembling aluminium and cast iron pumps.
Illustrates the physical steps involved in disassembling the pump.
Provides step-by-step instructions for reassembling the pump after disassembly.
Details the step-by-step procedure for disassembling stainless steel pumps.
Illustrates the physical steps involved in disassembling stainless steel pumps.
Provides step-by-step instructions for reassembling stainless steel pumps.
Advises on stocking essential spare parts to avoid breakdowns and ensure continuous work.
Provides detailed technical specifications for various pump models.
Recommends specific tightening torques for pump mounting and grub screws.
Explains the terms and conditions of the product warranty.
General| Pump type | Diaphragm pump |
|---|---|
| Max. suction lift | 5 m |
| Max. discharge pressure | 8 bar |
| Max Pressure | 8 bar (116 PSI) |
| Air inlet | 1/2" |
| Materials | Aluminum, PTFE |
| Material | Aluminum, PTFE, Santoprene |
| Power | N/A (Air Operated) |
| Voltage | N/A (Air Operated) |
| Frequency | N/A (Air Operated) |
| Liquid inlet/outlet | 2" NPT or BSP |
| Inlet/Outlet Size | 2" NPT or BSP |
To Next Page
