User information (cont)
Please Remember – Only use tablet or pellet salt in your softener!
16
Programming the Ultra 9 Faceplate
POWER CUTS
If the electrical power to the water softener is interrupted, the time display will be blank, but the ‘memory’ built into the electronics will keep
the correct time for up to 48 hours.
The water softener will not recharge but will pass softened water. In the case of a power cut your demand for water will be less as most
appliances will not work and so a recharge should not be necessary. When electrical power is returned,one of two things will happen:
1 Power off up to 48 hours
The display returns and is steady. No operation is necessary.
2 Power off over 48 hours
The display returns and flashes. Only the time requires re-setting. The hardness and recharge time will not have been lost as they are
stored. Even if the time is incorrect after a certain period, the water softener will continue to work but will recharge at what it believes the
time to be.
To Next Page
Loading...
