EasyManua.ls Logo

Targa HC-5100x - Still Picture and Frame-By-Frame Playback; Slow Scan; Repeat A-B; Repeat

Targa HC-5100x
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
STILL PICTURE AND FRAME-BY-FRAME
PLAYBACK
1. Press PAUSE/STEP on the remote control during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
2. To exit still motion mode, press PLAY.
SLOW SCAN
1. Press SLOW SCAN - m or M + during
playback.
The DVD/CD Receiver will enter SLOW mode.
2. Use the SLOW SCAN - m or M + to select the
required speed: t 1/2, t 1/4, t 1/8, t 1/16
(backward), or T 1/2, T 1/4, T 1/8, T 1/16
(forward).
With a Video CD, the Slow speed changes: T 1/2,
T 1/4, T 1/8, or T 1/16 (forward).
3. To exit Slow Motion mode, press PLAY (N).
Note:
Slow motion playback in reverse is not possible with
Video CDs.
REPEAT A-B
To repeat a sequence.
1. Press REPEAT A-B at your chosen starting point.
“A-” appears briefly on the TV screen.
2. Press REPEAT A-B again at your chosen end
point.
“A-B” appears briefly on the TV screen and the
repeat sequence begins.
3. Press REPEAT A-B again to cancel.
REPEAT
You can play a title/chapter/all/track on a disc.
Press REPEAT during playback to select a desired
repeat mode.
DVD Video Discs - Repeat Chapter/Title/Off
• Chapter: repeats the current chapter.
Title: repeats the current title.
• Off : does not play repeatedly.
Video CDs, DivX discs - Repeat Track/All/Off
Track : repeats the current track
• All : repeats all the tracks on a disc.
• Off : does not play repeatedly.
Notes:
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the repeat function (See “PBC” on
page 19).
If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
TIME SEARCH
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback. The time search
box shows the elapsed playing time.
2. Press v / V to select the time clock icon
and “-:--:--” appears.
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
Note:
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the Time Search function (See “PBC”
on page 19).
VCDDVD
DivXVCDDVD
VCDDVD
VCDDVD
DivXVCDDVD

Table of Contents