Need help?Do you have a question about the Tascam 414MKII PortaStudio and is the answer not in the manual?
General| Tracks | 4 |
|---|---|
| Recording Medium | Cassette Tape |
| Aux Sends | 1 |
| Built-in Effects | No |
| Tape Speed | 1 7/8 ips |
| Inputs | 4 XLR/TRS combo jacks |
| EQ | 3-band |
| Phantom Power | Yes |
| Power Supply | AC adapter |
Illustrates how audio signals travel through the mixer section, from input to output.
Explains how to select and adjust input signals for channels 1-4 and 5-8.
Details the functions of tape recorder controls like meters, ZERO RETURN, DBX, and PITCH CONTROL.
Describes the various input and output jacks located on the rear of the unit.
A step-by-step guide for recording audio onto the first track of the tape.
Guide on recording additional audio over an existing track while listening to previous tracks.
Procedure for mixing recorded tracks into a standard stereo format for final output.
Explains how to correct or improve recorded sections on tape by punching in.
Details the methods for initiating punch-in recording, with or without a footswitch.
Overview of the mixer section's components and functions.
Details the various input jacks and their functions for channels 1-4.
Explains the master fader and the EFFECT 2/TAPE CUE select switch.
To Next Page