Need help?Do you have a question about the Tascam US-428 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Analog Inputs | 4 |
| MIDI I/O | Yes |
| Sample Rate | 44.1 kHz, 48 kHz |
| Bit Depth | 16-bit |
| Connectivity | USB |
| Control Surface | Yes |
| Type | USB Audio Interface |
| Compatibility | Windows, Mac |
| Phantom Power | Yes (switchable) |
General introduction to the US-428 as a DAW controller and audio interface.
Details on audio interface, MIDI, and control surface capabilities of the US-428.
Lists the items included in the US-428 product package upon purchase.
Explains conventions used for titles, buttons, and connectors in the manual.
Diagram and numbering of controls on the US-428 front panel.
Diagram and numbering of connectors and switches on the US-428 rear panel.
Detailed explanation of each control and indicator on the US-428 front panel.
Detailed explanation of each connector and switch on the US-428 rear panel.
Minimum and recommended PC specifications for using the US-428 with software.
General steps for connecting and installing the US-428 hardware and drivers.
Step-by-step guide for installing US-428 drivers on Windows 98SE/ME and Win2K/XP.
Step-by-step guide for installing US-428 drivers on Macintosh systems.
Configuration of Open Music System for MIDI communication on MacOS.
Optimizing PC settings like DMA, RAM, and drives for audio applications.
Recommendations for optimal USB bus usage and hot-plugging with the US-428.
How to connect microphones, line-level sources, and digital sources to the US-428.
How to connect MIDI keyboards and sync devices to the US-428.
How to use the INPUT MONITOR function to eliminate audio latency.
Distinction between monitor level and master fader level controls.
Configuration options for ASIO handling, clock source, and sample rate.
Adjusting buffer size to manage audio latency and system performance.
Using the built-in chromatic tuner to tune audio inputs.
How to choose the US-428 as the primary audio input/output in software.
Setting sample rate, disk cache, and MIDI offsets in audio software.
Configuring ASIO settings and selecting the US-428 Native Mode.
Mapping the US-428 as a remote control unit for VST applications.
Selecting the appropriate sample rate (44.1kHz or 48kHz) for audio.
Activating specific input channels within audio software for recording.
Using US-428 transport buttons for playback, stop, record, and locate functions.
Controlling mute and solo states for individual tracks using US-428 buttons.
Adjusting EQ parameters (Gain, Freq, Q) for selected channels via US-428 controls.
Selecting and controlling auxiliary send levels for channels using US-428 buttons.
Using the data wheel for shuttle functions or controlling parameters like Aux sends.
Navigating between fader banks and using Fader Null for alignment.
Enabling low-latency direct monitoring through ASIO2 compatible software.
Preparing the US-428 and Cubasis for a recording session.
Steps for enabling tracks, setting levels, and starting recording in Cubasis.
Techniques for recording additional tracks while monitoring existing ones.
Adjusting faders, EQ, panning, and FX for the final mix in Cubasis.
Setting up the US-428 for use with Cubase VST on Windows.
Setting up the US-428 for use with Cubase VST on MacOS.
Configuring the US-428 for use with Nuendo software.
Setting up the US-428 to control Pro Tools software.
Configuring Macintosh Sound Manager for US-428 audio I/O.
Connecting and configuring the US-428 with Digital Performer on MacOS.
Information on Cakewalk and Sonar software support status for the US-428.
Using the US-428 with eMagic Logic software.
Using the US-428 for audio output and control with Reason.
Mapping the US-428 control surface to Native Instruments B4 virtual organ.
Information on Syntrillium Cool Edit software support status for the US-428.
General notes on expanding US-428 functionality with various applications.
Using keystroke emulation for applications not supporting MIDI commands.
Guidance on resolving common problems during installation and operation.
Information on how to get help from TASCAM support and online forums.
Where to find driver updates, FAQs, and other important information.
Details on accessing programming specifications for customisation.
To Next Page