59
8.10 Syntrillium Cool Edit
As this manual is being completed, the
current version of Cool Edit is 1.2a.
While there is no controller surface
support for the US-428 in this version,
Syntrillium has confirmed that the
version 2.0 update will contain full
support for the US-428.
If you are a Cool Edit user, you can still
run the US-428 as a high-quality audio
and MIDI interface even now. And since
Syntrillium expects to release the next
update very soon, chances are by the
time you read this support for the US-
428 will have been implemented. Check
with Syntrillium for current information
on the status of US-428 support. When
it is available, we will also post
information and setup documentation on
our website.
To Next Page
