Tascam US-428 - Page 58

58
Bank 1:
• Faders 1-8 + master =
DRAWBARS 1-9 ON THE UPPER MANUAL
• Mute 1 = VIB LOW ON/OFF
• Mute 2 = VIB UP ON/OFF
• Mute 3 = ROTATOR SPEED
FAST/SLOW
• Mute 4 = PERC ON/OFF
• Mute 5 = DRIVE ON/OFF
• Mute 6 = ROTATOR ON/OFF
• Mute 7 = VELOCITY ON/OFF
• Data Wheel = EXPRESSION
PEDAL
Bank 2:
(Similar to Bank 1 except):
 Faders 1-8 + master =
DRAWBARS 1-9 ON THE LOWER MANUAL
Bank 3:
(Similar to Bank 1 except):
• Faders 1-6 =
DRAWBARS 1-6 ON THE PEDAL MANUAL
Control View: All the previous controls
operate as before, and the EQ switches
and controls also allow these settings:
With EQ High activated:
• GAIN = TREBLE SLOW
• FREQ = TREBLE FAST
• Q = TREBLE ACCEL
• PAN = TREBLE TONE
With EQ Hi Mid activated:
• GAIN = TUBE AMP DRIVE
• FREQ = TUBE AMP VOL
• Q = TUBE AMP BODY
• PAN = TUBE AMP BRIGHT
With EQ Lo Mid activated:
• GAIN = MIC BALANCE
• FREQ = MIC PAN
• Q = MIC SPREAD
• PAN = MIC DISTANCE
With EQ Low activated:
• GAIN = BASS SLOW
• FREQ = BASS FAST
• Q = BASS ACCEL
• PAN = BASS TONE
With Aux 1 activated:
• GAIN = PERC VOLUME
• FREQ = PERC DELAY
• Q = PERC HARMONIC
• PAN = KEYCLICK AMT
With Aux 2 activated:
• GAIN = VIBRATO MIX
• FREQ = VIBRATO DEPTH
• Q = PERC HARMONIC
• PAN = KEYCLICK AMT