Tascam TM-D1000 User Manual

11 - MIDI Machine control
31 TASCAM TM-D1000 Operations Manual
11.6Locating to a memory position
Locating to a memory position is done by holding
down the
SHIFT key and pressing the CH SEL key of
the channel (location memory) to which you will be
locating.
11.7Editing a memory location
1 Press the MEMO key so that the display
shows
MEMO Edit on the top line.
NOTE
If MIDI Timecode is currently being received
at the
MIDI IN jack, you must press the MEMO
key twice to obtain the
MEMO Edit mes-
sage. If MIDI Timecode is not being received,
you only need to press the MEMO key once.
2 Press the CH SEL key of the memory location
you want to edit.
A memory location which has not been used (no
value has been captured for it) will show
00h00m00s00f as the location value.
3 Push and turn the DATA ENTRY knob to
move the cursor.
4 Turn the DATA ENTRY knob to set the values
of the field highlighted by the cursor.
Operating Tip
You can also use the
CH SEL keys here as
number keys. The
CH SEL keys of channels 1
through 9 enter their respective numerals,
and the
CH SEL key of channel 10 acts as a 0
key.
5 After checking that the new values are cor-
rect, press the
ENTER key to confirm your
setting.

Tascam TM-D1000 Specifications

General

Brand	Tascam
Model	TM-D1000
Category	Music Mixer
Language	English