EasyManuals Logo
Home>Taski>Floor Machine>ergodisc 2000

Taski ergodisc 2000 User Manual

Taski ergodisc 2000
Go to English
256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
65
Remove/change fleece dust bag
Cleaning the machine
Storing / parking the machine (not in operation)
Service, maintenance and care
The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
Remove the cover of the dust bag
container.
Remove the full fleece dust bag.
Clean the dust bag container with a
damp cloth.
Insert a new fleece dust bag.
Close the dust bag container with the
cover again.
Attention:
Never clean the machine with a high-pres-
sure cleaner or water jet.
Water ingress in the machine may cause
considerable damage to the mechanical or
electrical parts.
Wipe the machine with a moist cloth.
Notice:
The machine must be switched off and the
plug must be removed from the mains
socket.
Notice:
Store the machine with the tool lifted.
Attention:
Always remove the mains plug from the
mains socket when carrying out mainte-
nance work!
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
◊◊
◊◊◊
Page
Check the motor ventilation for dust ac-
cumulation, clean if necessary
Check/change fleece dust bag 65
Clean and dry the pad 64
Clean the machine with a moist cloth
In order to maintain operational safety and readiness for
use, the machine must be serviced after 250 working hours
or at least once a year.
Notice:
In case of extraordinary use and/or insuffi-
cient maintenance, shorter intervals are
required.
EN

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Taski ergodisc 2000 and is the answer not in the manual?

Taski ergodisc 2000 Specifications

General IconGeneral
BrandTaski
Modelergodisc 2000
CategoryFloor Machine
LanguageEnglish

Related product manuals