To Next PageTo Next Page
Need help?Do you have a question about the tau K550M and is the answer not in the manual?
Specifies connections for main power supply (230V/115V).
Terminal for connecting an external flashing light.
Connections for the single-phase motor, including capacitor.
Terminals for OPEN/CLOSE, PEDESTRIAN, and STOP pushbuttons.
Connections for opening and closing limit switches.
Terminal for a safety edge device to prevent crushing.
Input for photocells or other safety devices.
Connections for radio receiver aerial and auxiliary channel output.
Outputs for gate status LEDs and power for accessories.
Adjusts operating time, automatic closing time, and motor torque.
Configuration settings for automatic closing, photocell, and logic.
Specifies connections for main power supply (230V/115V).
Terminal for connecting an external flashing light.
Connections for the single-phase motor, including capacitor.
Terminals for OPEN/CLOSE, PEDESTRIAN, and STOP pushbuttons.
Connections for opening and closing limit switches.
Terminal for a safety edge device to prevent crushing.
Input for photocells or other safety devices.
Connections for radio receiver aerial and auxiliary channel output.
Outputs for gate status LEDs and power for accessories.
Adjusts operating time, automatic closing time, and motor torque.
Configuration settings for automatic closing, photocell, and logic.
General| Brand | tau |
|---|---|
| Model | K550M |
| Category | Control Panel |
| Language | English |
