4 MNL202.3
ENGLISH
1.1 INTRODUCTION
The Taurus monitor you buy is composed whit stainless steel. it can easily handle splashed water,
impacts and vibrations.it is professional display designed to operate with analogue signals (VGA),
digital graphic signals (DVI-D). Thanks to these features, they are suitable for several applications
such as the industrial, food and beverage and many others.
Main features:
• Manual regulation of the horizontal amplitudes and movements of the image;
• All the monitors can accept separated syncs, composite syncs and sync on green signals;
• Auto detect of the input signal;
• Auto adjustment function for perfect geometry settings at full screen;
• Energy saving function switches off the monitor in case of missing input signal;
• Full range power supply 100-240Vac, built in the monitor cases. 12Vdc & 19-36Vdc supply are
also available;
• OSD functions can be controlled by the control keys on the monitor;
• Infrared receiver (IR) available;
• Resistive, capacitive, SAW touch screens available.
1.2 NOTES
The instructions given in this manual are not a contractual obligation. The warranty conditions are
determined by law. The warranty is normally provided concerning malfunction of the product and
does not cover damages caused by misuse and tampering.
All rights are reserved. Any reproduction or translation of this manual is prohibited without our
permission.
1.3 WARNINGS
1.3.1 SYMBOLS AND CONVENTIONS
This symbol alerts the user to the risk of damage to things
or loss of data, if the observations are not respected.
This symbol warns the user of a hazard which may cause
serious injury or death, if the observations are not respected.
1.3.2 SAFETY
Read these safety instructions carefully. Keep this user’s manual for later reference and observing
all the warnings on the product as follow.
1 GENERAL DESCRIPTION
• Electric shock hazard – Do not operate the machine with its back
cover removed. There are dangerous high voltages inside.
• Never open the equipment. For safety reasons, only
qualifi ed service personnel should open the equipment.
• Disconnect this equipment from any outlet before cleaning.
To Next Page
Loading...
Need help?
General
