Taurus X71 - Pre-Set Profile Programmes (PROGRAM); Watt-Controlled Programmes (WATT)

23
3.4.2 Pre-Set Prole Programmes (PROGRAM)
You have 12 default programmes to choose from (P1-P12).
1. In the main menu select PROGRAM and conrm the selection by pressing the MODE button.
2. Select one of the programmes P1-P12 with the encoder and press MODE to conrm.
3. Set the resistance level, time, distance, calories and/or pulse with the encoder. Conrm each
setting with MODE.
4. Press START/STOP to begin the workout.
During the training, the resistance level can be adjusted with the encoder.
5. Press START/STOP to pause the training.
6. Press START/STOP to continue the training.
7. Press RESET, to end the training and return to the main menu.
3.4.3 Watt-controlled Programmes (WATT)
1. In the main menu select WATT and conrm the selection by pressing the MODE button.
L NOTICE
To skip setting the parameters, press START to directly begin the workout.
2. Press MODE to set the parameters.
3. Set watt, time, distance, calories and/or pulse with the encoder. Conrm each setting with
MODE.
4. Press START/STOP to begin the workout.
During the training, the value for watt can be adjusted with the encoder.
5. Press START/STOP to pause the training.
6. Press START/STOP to continue the training.
7. Press RESET, to end the training and return to the main menu.