Taurus X71 - Maintenance and Inspection Calendar

27
No pulse display
+ Sources of interference in
the room
+ unsuitable chest strap
+ Wrong position of chest
strap
+ Chest strap defective or
battery empty
+ Pulse display defective
+ Eliminate sources of interference (e.g.
mobile phone, WLAN, lawn mower
and vacuum cleaner robot, etc. ...)
+ Use a suitable chest strap (see
RECOMMENDED ACCESSORIES).
+ Reposition chest strap and/or
moisten electrodes
+ Changing batteries
+ Check if pulse display by hand pulse
possible
5.3 Maintenance and Inspection Calendar
To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!)
after each training session.
The following routine tasks must be performed at the specied intervals:
Part Weekly Monthly Quarterly
Display console C I
Slide rails* C
Lubrication of slide rails and moving parts* I
Plastic covers C I
Screws and cable connections I
Legend: C = clean; I = inspect
*Make sure to always clean the slide rails and moving parts before re-lubricating.
By scanning the QR code with the camera function or QR code scanner app of your smartphone/
tablet, a video on general maintenance of a crosstrainer opens on YouTube. The
video serves to illustrate the maintenance points described in this manual.
Please note that the video may not be available in your language or with appropriate
subtitles.
If you cannot scan QR codes, you can access all Sport-Tiedje videos on YouTube by
rst opening YouTube and entering “Sport-Tiedje” in the search eld.