SECTION 2 PAGE 2
MB-T48-01
Safety Rules and Guidelines
It is the responsibility of the
owner of this vehicle to assure
that the operator understands
the various controls and
operating characteristics of this
vehicle and the following safety
rules and guidelines (extracted
from the American National
Standards Institute Personnel
and Burden Carriers ANSI
B56.8).
This vehicle is designed for
driving on smooth surfaces in
and around industrial plants,
nurseries, institutions, motels,
mobile home parks, and
resorts. It is not intended for
use on public streets and
highways.
To operate this vehicle, please follow these
directions:
1. Make sure forward-reverse switch is in
the center “OFF” position and the park
brake is set.
2. Hold down the foot brake.
3. Insert the key and turn it to the “ON”
position.
4. Wait 2 seconds, or until a click sound
is heard.
5. Place the forward-reverse switch to the
desired direction of vehicle travel.
6. Release the park brake.
7. Release the foot brake.
8. Slowly apply pressure to the
accelerator pedal.
To Next Page
Loading...
Need help?
General
