Taylor 150 - Page 50

47
Models 150, 152, 162, 168
Parts
Beater & Door A. (Models 162/168)
ITEM DESCRIPTION PART NO.
1 DRAW VALVE 024763
2 O-RING-7/8 OD x .103 W 014402
3 SEAL --VALVE 030930
4 DOOR A.-3 SPOUT X30753-SER
5 PIVOT PIN A. --SHORT X38539
6 O-RING-5/16 OD x .070 W 016272
7 DRAW VALVE HANDLE 030564
8 HAND SCREW (STUD NUT) 034829
ITEM DESCRIPTION PART NO.
9 DESIGN CAP 014218
10 PIVOT PIN A.--LONG X38538
11 GUIDE BEARING 014496
12 CENTER DRAW VALVE 031164
13 O-RING-2-3/4 OD x .139 W 019998
14 FRONT BEARING 023262
15 BEATER ASSEMBLY X24689
16 O-RING-13/16 OD x .139 W 021278