Taylor 150 - Models 162 & 168 Door Assembly

12
Models 150, 152, 162, 168Operator Parts Identification
120501
Models 162 & 168 Door Assembly
Figure 6
Item Description Part No.
1 Valve - Draw 024763
2 O- Ring- 7/8 OD x .103 W 014402
3 Seal - Draw Valve (H- Ring) 030930
4 Kit A.- Door 3 Spt 1.5 Qt. Valox X56906 - SER
4a Nut - Stud 056802
5 Pin A.- Pivot Short X38539
6 O- Ring- 5/16 OD x .070 W 016272
7 Handle - Draw Valve 030564
Item Description Part No.
8 Cap- Design 1.010” ID - 6 Point 014218
9 Pin A.- Pivot Long X38538
10 Valve- Draw- Center 031164
11 Bearing- Guide 014496
12 O - Ring - 2- 3/4 OD x .139 W 019998
13 Bearing- Front 023262
14 Beater A. X24689
15 Seal- U- Cup 080534