Taylor 150 - Section 9 Parts Replacement Schedule

32
Models 150, 152, 162, 168Parts Replacement Schedule
120501
Section 9 Parts Replacement Schedule
PART DESCRIPTION EVERY 3
MONTHS
EVERY 6
MONTHS
ANNUALLY QTY.
150/152 162/168
Beater Drive Shaft Cup Seal X 1 2
Freezer Door O- Ring X 1 2
Freezer Door Front Bearing X 1 2
Freezer Door Guide Bearing X 1 2
Draw Valve O- Ring X 2 4
Draw Valve Handle O- Ring X 1 -
Center Draw Valve Seal X - 1
Pivot Pin O- Ring X - 2
Black Bristle Brush, 1” x 2” Inspect & Replace
if Necessary
Minimum 1 1
Double Ended Brush Inspect & Replace
if Necessary
Minimum 1 1
White Bristle Brush, 1” x 2” Inspect & Replace
if Necessary
Minimum 1 1
White Bristle Brush, 3” x 7” Inspect & Replace
if Necessary
Minimum 1 1