EasyManua.ls Logo

Taylor 358 - Model 358 Specifications

Taylor 358
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Introduction
Models 358 & 359
Model 358 Specifications
S Freezing Cylinder - One; 7 quart (6.6 liter)
capacity.
S Mix Hopper - One; 20 quart (18.9 liter)
capacity. Refrigerated and insulated.
S Beater Motor - One; 1.5 hp.
S Refrigeration Unit - One; approximately
9,500 btu/hr compressor. Refrigerant 404A.
S Electrical - Standard is 208/230-60-3;
however, other electrical characteristics are
available. Each unit requires electrical
service.*
Three Phase Maximum Fuse Size: 20A
Minimum Circuit Ampacity: 16A
*For exact electrical information, always refer
to the data label of the unit.
S Air Cooled - Clearance: 3” (76 mm) around
all sides.
S Dimensions -
Width: 16” (406 mm)
Depth: 30” (762 mm)
Height: 55-7/8” (1418 mm)
Floor Clearance: 3-1/2” (89 mm) mounted
on standard casters.
S Approximate Weights -
Net: 356 lbs. (161.5 kgs.)
Crated: 400 lbs. (181.4 kgs.)
Volume: 22.3 cu. ft. (.63 cu. m.)
Availability and specifications subject to change
without notice.
Figure 1
https://appliancetechmanuals.com

Other manuals for Taylor 358

Related product manuals