12
Important: To the Operator
Models 441 & 444
Thermistor Control
The viscosity (thickness) of the product is controlled by
a temperature sensing device called the thermistor. To
achieve a thicker product, turn the control clockwise,
and turn the control counterclockwise to achieve a
thinner product. Allow the re frigeration system to cycle
on and off 2 or 3 times before an accurate consistency
can be evaluated.
Separate Hopper Refrigeration
System (SHR)
The Separate Hopper Refrigeration System (SHR) is
a standard feature. The SHR incorporates the use of
a separate small refrigeration system to maintain the
mix temperature in the hopper to below 40_F. ( 4. 4_C.)
This assures bacteria control.
To Next Page
Loading...
