15
Models 750, 751, 754, 774, 791, 794 Operator Parts Identification
Models 754, 774 & 794 Three Spout Door and Beater Assembly
Item Description Part No.
1 Handle A.--Draw X55096
1a Draw Handle 028804
1b Screw --Adjustment 055092
1c O--Ring 1/4 OD x .070 W 015872
1d Nut--Jam 029639--BLK
2 Nut--Stud Long 034382
3 Nut--Stud Short 034383
4 Valve A.-- Draw X18303
5 O--Ring 7/8 OD x .070 W 014402
6 Shaft--Beater 032564
Item Description Part No.
7 Seal--Drive Shaft 032560
8 Cap--Design 014218
9 Decal--Door 021521
10 Door A. --3 Spout X51532--12
11 Rod A.--Pivot X20683
12 O--Ring5/16ODx.070W 016272
13 Gasket--Door HT 4” 048926
14 Bearing--Front 050216
15 Beater A.--Helicore X31761
16 Blade --Scraper 035174
To Next Page
Loading...
