Taylor 750 - Page 20

16
Models 750, 751, 754, 774, 791, 794Operator Parts Identification
120124
Model 791 Three Spout Door and Beater Assembly
ITEM DESCRIPTION PART NO.
1 HANDLE A.--DRAW X55096
1a DRAW HANDLE 028804
1b SCREW--ADJUST 055092
1c O--RING 1/4OD X .070W 015872
1d NUT --JAM 029639--BLK
2 PLUG--PRIME 028805
3 ROD A.--PIVOT X22388
4 NUT --STUD LONG 034382
5 NUT --STUD SHORT 034383
6 VALVE A.-- DRAW X69539
7 O--RING 7/8OD X .070W 014402
ITEM DESCRIPTION PART NO.
8 CAP--DESIGN 014218
9 DECAL --DOOR 021521
10 DOOR A. -- 3--SPOUT X49461--4
11 ROD A.-- PIVOT X22387
12 O--RING 5/16OD X .070W 016272
13 GASKET--DOOR HT 4” 048926
14 BEARING--FRONT 050216
15 BEATER A.-- HELICORE X31761
16 BLADE-- SCRAPER 035174
17 SHAFT--BEATER 032564
18 SEAL--DRIVE SHAFT 032560