36
Models 750, 751, 754, 774, 791, 794Troubleshooting Guide
PROBLEM PROBABLE CAUSE REMEDY PAGE
REF.
11. Product is not feeding into
the freezing cylinder.
a. Inadequate level of mix in
the mix hopper.
a. Fill the mix hopper with
mix.
28
b. The mix inlet hole is
frozen up.
b. The mix hopper
temperature needs
adjustment. Call service
technician.
−−−
c. The air tube is installed
incorrectly.
c. Install the air tube in the
mix inlet hole, using the
end with the small hole in
the side.
28
d. The air orifice is not
installed.
d. Install the air orifice in the
air tube.
28
To Next Page
Loading...
