Taylor C706 - Page 37

33
Model C706 Troubleshooting Guide
030206
PROBLEM PROBABLE CAUSE REMEDY PAGE
REF.
15. Excessive pump cylinder
wear.
a. Inadequate or incorrect
lubrication of pump
cylinder.
a. Follow lubrication
procedures carefully.
19
b. Incorrect ball crank
rotation.
b. Contact service
technician.
-- -- --
16. Pitting occurring inside the
pump cylinder.
a. Cleaner was left inside the
pump cylinder.
a. After brush cleaning the
pump cylinder, allow it to
air dry. Follow
disassembly procedures
carefully.
26
17. The ball crank of the
motor reducer is broken.
a. Incorrect rotation of pump
motor.
a. Contact service
technician.
-- -- --
18. Too much pressure in the
freezing cylinder.
a. Plugged relief hole in the
inlet tube.
a. Clean.
-- -- --
19. Not enough pressure in
the freezing cylinder.
a. Malfunctioning draw
switch.
a. Contact service
technician.
-- -- --