61
• Kay
®
Hi-temp tool with double-sided bristle brush
• Squeegee
• Sundae spoon
• Release sheet storage tray
• Soy adhesion flakes
When the cook surfaces reach the proper temperature
for cleaning, Cleaning in progress will be displayed.
6. Press the Next key to proceed.
7. Put on heat-resistant gloves. See Figure 140.
Figure-140
CAUTION! The upper platen surface and
release sheet are very hot. To prevent burn injuries, wear
heat-resistant gloves when replacing the release sheets.
8. Wipe the exposed surface of the release sheets with
a clean, sanitizer-soaked grill cloth.
See Figure-141.
Figure-141
9. Spray a clean, sanitizer-soaked grill cloth with one
spray of grill cleaner.
See Figure-142.
Figure-142
10. Use the sanitizer-soaked grill cloth to wipe clean the
exposed surfaces of the upper release sheets,
including the sides. Repeat the cleaning for the lower
release sheets.
See Figure-143.
Figure-143
11. Rinse the upper release sheets with a separate
sanitizer-soaked grill cloth. Wipe until the grill cleaner
residue has been fully removed.
See Figure-144.
Figure-144
To Next Page
Loading...
