Taylor C860 User Manual

49
STANDBY PROCEDURES
Whenever the grill is idle and product is not being
cooked, the upper platen must be placed in the Standby
position.
1. To place the upper platen in the Standby position,
press the STANDBY button twice from the Open
position. See
Figure-84.
Figure-84
2. To raise the upper platen to the Open position to
resume cooking, press the RAISE button.

See Figure-85.
Figure-85
Note: If the grill remains idle for 5 continuous minutes
without being placed in Standby, a tone will sound and
the display will flash PUT GRILL IN STANDBY.
Note: FRANCE ONLY: With the upper platen in the
OPEN position, press the STANDBY button to enter the
Standby. To start cooking, lower the upper platen.
CAUTION! Never use force to raise the upper
platen. Damage to components may result. Only use the
RAISE button to open the upper platen.
CLEANING AFTER EACH RUN OF PRODUCT
(USING LOWER RELEASE SHEETS)
Note: This manual contains separate procedures for
grills that use lower release sheets and for grills that do
not use lower release sheets. Use the appropriate
procedures for your grill.
If your grill does not use lower release sheets, go to
page 50.
Note: Do not use excessive pressure when wiping the
release sheet with the squeegee. Using excessive
pressure can scratch or tear the release sheet.
1. Squeegee the lower release sheet from front to back.
See
Figure-86.
Figure-86
2. Squeegee the upper release sheet from top to
bottom.
See Figure-87.
Figure-87
30148_A
30149_A

Taylor C860 Specifications

General

Brand	Taylor
Model	C860
Category	Commercial Food Equipment
Language	English