USER INTERFACE
5-5
Model L850, L852, L858 Series
User Interface
5
= Events Key - Displays information
regarding recent power-ups, grill
activation, clean, leveling, etc.
= Remote Logging Key - Displays the
remote connection passcode.
= Clean Key - Takes the grill into the
ready mode for cleaning.
= Auto Calibration Key - Allows the user
to auto calibrate and gap check.
= Settings Key - Allows the manager, or
technician to enter the passcode to enter
the Manager or Service menu.
= Relay Key - Future Development.
= Upper Platen Key - Allows the
technician to manually raise and lower
the upper platen.
= Lower Plate Key - Allows the
technician to manually move the lower
plate to a specific position.
= Settings Backup Key - Allows the user
to export, import, and factory restore.
= Heater State Key - Allows each heater
element to be turned on individually.
= Switch States Key - Displays the ON/
OFF state of the Raise, Standby, and
Latch (position sensor).
= Factory Restore Key - Restores
settings to initial setup.
= Reset to Defaults - Returns the control
to the factory settings.
= Recipes Key - Functions associated
with recipes.
= Grill Mode Key - Allows the user to
toggle between Manual and Auto modes.
= Manual Key - Sets the grill to Manual
mode.
= Auto Key - Sets the grill to
automatically detect product placed on
the grill and sets the proper cooking
parameters.
= Font Limits Key - Allows the user to
change the font size.
= Platen Temperature Key - Allows the
user to raise or lower the upper platen
and lower plate temperatures for the
menu item displayed.
= Scale Key - Allows the user to select
Celsius or Fahrenheit.
= Temperature Calibration Key - Allows
the user to calibrate temperatures of
specific areas on the grill.
= Export to Histories Key - Allows the
user to export configuration files and
faults to a USB drive.
= Stored Temperature Key - Indicates
temperature adjustments and if they
were made by the manager or service
tech.
= Time Format Key - Allows the user to
choose either the 12- or 24-hour format.
= Diagnostic Mode Key - This function is
used to place the grill in a diagnostic
state that will allow you to enter the Test
mode.
= Floor Level Calibration Key - Allows the
user to level each lower plate individually
by using a small level and adjusting each
actuator independently.
To Next Page
Loading...