9
Select one Tuner as “Preferred”.
3.2. Scan Channels
Back to the menu and click “Channel scan”.
The windows of “Scan channels” will pop up. Select Reception Type as
“Terrestrial” and Select Transponder List basing on where you are. Normally
“Fullscan” is recommended if you don’t know your terrestrial TV frequency.
“Fullscan” is relatively slow but it ensures you won’t miss any frequency. Then click
“Scan Range” to start scan. If you do know your terrestrial TV frequency and you
may input that frequency and click “Scan Frequency” directly.
To Next Page
