TC Electronic DITTO X2 LOOPER English Manual

Getting support
Ditto X2 Looper English Manual 23
Technical specifications
– Maximum loop length: 5 minutes
– Maximum no. of overdubs: Unlimited
– Bypass mode: True Bypass
– Latency: None (analog dry-through)
– Dimensions (Width x depth x height):
113 mm x 135 mm x 54 mm /
4.44” x 5.31” x 2.13
– Weight: 512 g / 1.13 lbs.
– Input connectors:
Stereo – 2 standard TS ¼” jacks
– Output connector type:
Stereo – 2 standard TS ¼” jacks
– Power input: Standard 9 V DC,
centre negative (not supplied)
– USB connector type: Mini-B USB
Controls:
– Loop level knob
– Loop footswitch
– FX footswitch
– FX selector switch
– Store / Backing track level switch
Due to continuous development, these speci-
fications are subject to change without no-
tice.
Getting support
As you have probably realized by now, Ditto
X2 Looper offers a wealth of features, and you
may have questions that we didn’t cover in this
manual. To learn more about setups, importing
and exporting loops as backing tracks, creative
techniques etc., please go to the Ditto X2 Looper
FAQ at
http://tcelectronic.com/ditto-x2-looper/faq/
You will also find a link to this page in your Ditto
X2 Looper’s folder when you have connected it
to your computer.
If you still have questions about the product after
reading this manual and the FAQ page, please
get in touch with TC Support:
http://tcelectronic.com/support/

TC Electronic DITTO X2 LOOPER Specifications

General

Brand	TC Electronic
Model	DITTO X2 LOOPER
Category	Music Pedal
Language	English