TC Electronic FLASHBACK - Loop Functionality; How to Use the Looper; Loop Recording Notes

13
LOOP
With Flashback’s loop function you can record and playback grooves and lines for playing along. You
can even overdub your recording an unlimited number of times.
Thedurationofaloopcanbeupto40secondsinmonoand20secondsinstereoregardlessofhow
many overdubs you make.
How does it work?
1 SelectLOOP.
2 Makesurethepedalisinbypassmode(LEDoff).Feelthegrooveandprepareforrecording.Then
presstheswitchtostartyourrecordingandplay.TheLEDflashesred.
3 Presstheswitchagaintostoprecording.Flashbackimmediatelystartsplayingtheloop.Inthis
playmodetheLEDisgreen.
4 Tooverdubyourrecordingpresstheswitchoncemore.TheLEDnowblinks.
5 Todeleteallrecordings,double-clicktheswitch.
Pleasenotethefollowing
- Thefirstroundofrecordingalwayssetsthelengthoftheloop(1).Ifanoverdubexceedsthelength
oftheloop(2),athirdroundofrecordingbegins(3).Thisgivesaverynatural,logicandmusical
feel when recording loops.