30
Setting the Subnet Mask of the Mainframe 6000 via the
TC Icon
• Go to the Setup Select pages.
• Select the Main Frame on which you wish to change
Subnet Mask.
• Press Subnet Mask key and type in the desired Subnet
Mask.
Setting the Subnet Mask of the TC Icon
Be aware that the Subnet Mask for all connected
devices must be the same. Since all Subnet Masks
can be set via the TC Icon the last Subnet Mask to
set must be the TC Icon Subnet Mask.
Go to the Setup Select pages.
• Select Setup - Net.
• Press the Subnet Mask key and type in the desired
Subnet Mask.
• Press Enter to exit.
The Subnet Mask for the TC Icon is now set.
Setting the TCP/IP address of the TC Icon
Go to the Setup Select pages.
• Select Setup - Net.
• Press the IP Address field and type in the desired
IP Address.
• Press Enter to exit.
The TCP/IP address for the TC Icon is now set.
Setting the TCP/IP address of the Mainframe
• Go to the page:
Frame - System - Main - Net ID page.
• Press the field: Mainframe TCP/IP address.
The Naming display appears.
• Enter the TCP/IP and press ENTER.
The Subnet Mask for the Mainframe is now set.
SETTING SUBNET MASK AND TCP/IP
To Next Page
Loading...
