To Next PageTo Next Page
Need help?Do you have a question about the TC Electronic UNIT•Y and is the answer not in the manual?
General| Brand | TC Electronic |
|---|---|
| Model | UNIT•Y |
| Category | Music Equipment |
| Language | English |
Explains the 100-hour demo period and the necessity of licensing software modules.
Provides instructions for obtaining the initial license via internet, fax, or dealer.
Details how to purchase optional licenses for additional software modules.
Outlines steps to acquire an optional license using website, fax, or dealer, including credit card payment.
Explains the need to replace console EPROMs with new ones delivered with the UNIT•Y card.
Describes the power-up screen and how to check the OS revision number.
Guides on powering down and fitting the UNIT•Y card into any slot.
Explains parameter control via cursor, wheel, and faders, which can be automated.
Explains presets are stored on the UNIT•Y card and handled from the Main screen.
Explains signal routing is done on UNIT•Y Main and 02R DIO screens, varying per scene.
Lists available signals like Aux, Bus, Main L/R, and insert points for feeding UNIT•Y engines.
Illustrates standard input routing on a Yamaha 02R, showing slot usage.
Explains how UNIT•Y with I/O allows mixing external/effect signals to the Main L/R bus.
Details applying extended routing in slots 3 or 4 via the EXT RT button.
Explains how to enable extended routing and potential issues if the button is greyed out.
Explains returns for slots 1-4 without I/O on Tape or Mic inputs.
Explains returns for slots 1-3 with I/O, including tape/mic inputs and output options.
Covers slot 4 routing with I/O, including mic inputs and output options.
Describes available reverb algorithms and their location in preset areas.
Details parameters for Room Shape, Size, and Hi Cut frequency.
Covers Pre Delay, Diffusion, Decay frequencies, and Image Width.
Explains high-resolution delay with 1200 ms on 4 taps, coarse/fine delays.
Shows the engine screen for controlling delay parameters like Feedback, Taps, and frequencies.
Details pitch change with 6 polyphonic voices, 24-bit delays, and ±1 octave range.
Covers parameters like Pitch (Odd/Even Voices), Delay, Width, and Level.
Displays the engine screen for controlling pitch change parameters.
Describes the digital true stereo algorithm for chorus/flanging effects.
Shows the engine screen for controlling Chorus/Flanger parameters.
Introduces the digital true stereo phaser algorithm, flexible for master signals.
Details parameters like Order, Focus, Phase, Feedback, and Fx/Direct Balance.
Displays the engine screen for Phaser control.
Explains the De-esser's purpose and its use with group busses.
Covers parameters like Mon, Shelve, Threshold, Ratio, Bandwidth, Attack, and Release.
Shows the De-esser engine screen for parameter adjustment and monitoring.
Introduces multi-band compression via the optional Finalizer software module.
Explains routing configurations from mono to stereo using Slot Outputs, Main L.R, and DIO.
Details the algorithm's components: 3-band Expander, Compressor, Limiter, and Soft Clipping.
Contrasts multi-band compression with broad-band, explaining static/dynamic spectral balance.
Notes parameters set for Mid band and interactions between settings.
Explains look-ahead delay for reacting to signals ahead of time.
Explains Expander parameters: Ratio, Threshold, Attack, Release, and Gate function.
Details Compressor parameters: Threshold, Ratio, Make-up gain, Attack, Release.
